DLTK's Crafts for Kids
Halloween Stained Glass Craft
Use this as a craft you can hang in your window or make
it as a card for your mom.
There is an option at the bottom for younger kids, instead of melting
- waxed paper.
- wax crayons (Crayola don't work as well as the cheap kind
for this project, though they do still work)
- manual pencil sharpener (with a fairly large hole)
- iron, ironing board and scrap paper (white computer paper or
brown paper bag)
- construction paper,
- glue stick or white glue.
- ADULT: Plug in the iron and cover the ironing board
with scrap paper. Set the iron to medium (no steam).
Tear a piece of waxed paper that's square (or a bit longer
than it is wide) and fold it in half. Then unfold.
- take the paper off a black and orange crayon and 'sharpen' them in
the pencil sharpener letting the shavings drop onto a piece of paper
off to the side.
- Arrange the black shavings first to make the pumpkin face.
Then add the orange shavings in the surrounding space. You
don't have to completely fill the space, it will spread about a bit
when you use the iron.
- when you have a nice pile of shavings refold the waxed paper.
- Fold about 1/2 inch around all the edges so none of the wax leaks
out when you iron.
- Place the waxed paper containing the shavings down on the ironing
board and cover with more scrap paper.
- Iron for a few seconds. Peek and iron a bit more if
necessary. All the wax should melt. If you used multiple
colours the longer you iron,
the more your colors will mix.
- You'll find that nothing happens, nothing happens, nothing happens
and then BAM it's totally melted, so just keep waiting a few seconds
at a time and
peeking so you don't burn anything.
- Let it sit about a minute to cool.
- Fold a piece of construction paper in half and then in half again.
- don't crease very much (the less you crease it the better, but
young children may need it creased quite well).
- Print the template (link below) and cut out the half
Line up the flat edge of the half bat shape with the folded edge
of the construction paper. Trace the half bat shape onto the
construction paper. Cut out the half pumpkin.
- Unfold the last fold of the construction paper and you'll see the pumpkin in the middle.
- Unfold the construction paper again and put glue around the cut
out pumpkin. Put your waxed paper ("stained glass")
onto the glue and cover the cut out pumpkin.
- Put glue around the cut out pumpkin on the other half of the construction paper and fold it over
so the 'stained glass' is sandwiched between the construction paper.
Thanks Geri for sending this in!
"Have the kids color a picture with crayons. They can color dark or light - it doesn't matter but
the darker sometimes looks better. They really do look like stained glass pictures, especially if the picture had heavy black
- Use crayons, NOT markers or colored pencils.
- Have a few bowls with a VERY small amount of cooking oil and a couple of cotton balls in them.
- Have the kids flip the pages over and slowly and thoroughly rub the cotton balls on the paper.
(You'll see the paper turn transparent and the colors come through).
- Put them aside to dry (usually doesn't take long)!
- Cut them out and either hang them as is with a hole punched
in them or frame them with construction paper.
Thanks Terri for sending this in!
"I have done for this to make it more suitable for younger kids. Instead of using wax paper and melting
- Use clear Contact Paper and tissue paper pieces.
- Put Contact Paper piece sticky side up on the table (may need to tape it down).
- Let kids stick tissue paper pieces to the sticky paper
- Cover with another piece of Contact Paper sandwiching the tissue in between.
- Frame with dark construction paper as directed for the
melted crayon version.
- Close the template window after printing to return to this screen.
- Set page margins to zero if you have trouble fitting the template on one page (FILE, PAGE SETUP or FILE, PRINTER SETUP in most browsers).
Printable version of these instructions